Specifications
MANTA Technical Manual
V6.0.1
38
Manta G-201B/C (-30fps*)
*: 30fps model only
Feature
Specification
Sensor
Type 1/1.8 (diag. 8.9 mm) progressive scan SONY IT CCD ICX274AL/AQ
with Super HAD microlens
Effective chip size
7.1 mm x 5.4 mm
Cell size
4.40 μm x 4.40 μm
Resolution (max.)
1624 x 1234 pixels
Lens mount
C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
maximum protrusion: 9.7 mm
(see
Figure 39: Manta C-Mount dimensions (16 mm filter, type A)
on page
81)
CS-Mount: 12.526 mm (in air); Ø 25.4 mm (32 tpi)
maximum protrusion: 5.1 mm
(see
Figure 40: Manta CS-Mount dimensions (type A)
on page 82)
ADC
14 bit
Pixel format
GenICam:
Only monochrome:
Mono8, Mono12Packed, Mono12
Only color:
BayerGB8, BayerGB12Packed, BayerGB12, Mono8,
RGB8Packed, YUV411Packed, YUV422Packet, YUV444Packed,
BGR8Packed, RGBA8Packed (not -30fps), BGRA8Packed (not -30fps)
Displayed with
PvAPI
as:
Only monochrome:
Mono8, Mono12Packed, Mono16
Only color:
Bayer8, Bayer12Packed, Bayer16, Mono8, RGB24, YUV411,
YUV422, YUV444, BGR24, RGBA32 (not-30fps), BGRA32 (not -30fps)
Frame rates
Up to 14 fps (*30 fps)
Gain control
Manual: 0-31 dB (1 dB/step); auto gain (select. ROI)
Exposure time
51 (*10) μs … 60 s; auto shutter (select. ROI)
External trigger event
Rising edge, falling edge, any edge, level high, level low
External trigger delay
0 to 60 seconds in 1 μs increments
Fixed rate control
1 fps ... max. frame rate (steps of 0.1 fps)
Imaging modes
Free-running, external trigger, fixed rate, software trigger
Sync Out modes
Trigger ready, trigger input, exposing, readout, imaging, strobe, GPO
Table 12: Specification Manta G-201B/C (*:-30fps)
Note
Maximum protrusion
means the distance from lens flange to
the glass filter in the camera.
