Camera interfaces
MANTA Technical Manual
V6.0.1
96
Gigabit Ethernet port
The Gigabit Ethernet port conforms to the IEEE 802.3 1000BASE-T standard for
Gigabit Ethernet over copper. We recommend using Category 5e or Category 6
compatible cabling and connectors for best performance.
Note
•
Cable lengths up to 100 m are supported.
•
The 8-pin RJ-45 jack has the pin assignment according to
the Ethernet standard (IEEE 802.3 1000BASE-T).
•
For cameras that are
PoE
capable, the GigE connector can
be used to provide power to the camera.
•
Manta
PoE
models can source power
– from 802.3af (1000 MBit/s) and
– from 802.3at compliant PSE devices (Power Sourcing
Equipment): such as switches injectors or NICs.
•
If both interfaces are used for power (I/O and GigE con-
nector via
PoE
), the camera will only use the power from
the I/O connector.
Same main board for all Manta models
From serial number
503323258
on all Manta models incl. PoE
and board level versions contain the same main board.
PoE and non PoE
•
How can I distinguish between PoE capable cameras and
cameras that are not PoE capable?
–
PoE
capable cameras have the letters
PoE
written on
the camera‘s label on the back side and the bottom
side of the camera.
Accessories
•
Cables are available from AVT:
http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html
•
Ask your local dealer for more details.
