Camera interfaces
MANTA Technical Manual
V6.0.1
97
Camera I/O connector pin assignment (incl. PoE)
Note
From serial number
503323258
on all Manta models incl. PoE
and board level versions contain the same main board:
•
All I/O circuits have the same properties.
•
For
Manta models with older serial number
:
use the Manta Technical Manual V4.1.0 (Manta_Tech-
Man_V4.1.0_en.pdf).
Figure 53: Camera I/O connector pin assignment
Note
For a detailed description of the
I/O connector and its
operating instructions
see the
Installation Guide, Chapter
MANTA input description
.
Read all
Notes
and
Cautions
in the Installation Guide before
using the I/O connector.
1
10
2
9
8
7
6
12
11
3
4
5
Pin Signal
Direction Level
Description
1 Camera GND
---
GND for RS232 and
ext. power
Ground for camera power
supply and RS232
2 Camera Power ---
+8 ... +30 V DC
Camera power supply
3 Video Type
Auto Iris Out
---
---
Video type auto iris
(
FW 1.44)
4 In 1
In
Standard and PoE
cameras:
U
in
(high) = 3.0 V...24.0 V
up to 36 V with external
resistor of 3.3 k
in series
U
in
(low) = 0 V...1.0 V
Input 1
5 ---
---
---
---
6 Out 1
Out
Open emitter,
max. 10 mA
Output 1
7 Isolated IO
GND
In/Out
Common GND for In/Out
Isolated input and output
signal ground
8 RxD RS232
In
RS232
Terminal Receive Data
9 TxD RS232
Out
RS232
Terminal Transmit Data
10 Isolated Out
Power
In
Common VCC for outputs
max. 30 V DC
Power input
for opto-isolated outputs
11 In 2
In
Standard and PoE
cameras:
U
in
(high) = 3.0 V...24.0 V
U
in
(low) = 0 V...1.0 V
Input 2
12 Out 2
Out
Open emitter,
max. 10 mA
Output 2
