953.230UK User Manual
Introduction
Thank you for choosing an Adastra COM230 active paging station for your compact audio installation.
This unit is designed to power wall or ceiling mounted speakers and offer microphone paging to 2
separate zones. Please read this manual to gain the best results from your product and avoid damage
through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture. If
liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.
No user serviceable parts inside
–
Do not open the case
–
refer all servicing to qualified service
personnel.
Safety
•
Only use the power adaptor supplied with the COM230. Other adaptors may damage the circuitry.
•
Check for correct supply voltage before connecting the power adaptor to the mains.
Placement and Assembly
•
Position the COM230 on a stable surface, such as a worktop, counter-top or desktop.
•
Ensure adequate access to rear panel connections and controls.
•
Allow enough slack lead length to avoid straining cable or connectors at the rear panel.
Cleaning
•
Use a soft cloth with a neutral detergent to clean the housing as required.
•
Use a vacuum cleaner to clear apertures and controls of any dust or debris build-up.
