background image

 

ENGLISH 

Important safety instructions! Please read before connection!

 

 
 

DANGER! (Electrical shock due to high voltages in the device) 

The housing must not be removed! There are 

no

 parts to be maintained in the device. 

Inside the unit there are components which are under high electrical voltage. 
 

Before each use, check the device for damage or the absence of components, protective 
devices or housing parts. If this is the case, the device must not be used!  

 
Leave maintenance and repair work to a qualified service workshop or contact your 

dealer. In the case of a malfunction of the device, operation must also be stopped 

immediately until the device has been repaired by a specialist! 
 

 

DANGER! (Electric shock due to short circuit) 

Modifications to the power cord or plug are prohibited. If the power cord is damaged in any 
way, it must be replaced immediately with an original spare part from the manufacturer.  

 
Always make sure that the grounding of the device is maintained. Use only the supplied 

power cords and always maintain the side grounded contacts. Make sure that the sockets 
used have a properly functioning protective earth.  

 
Failure to do so may result in fire or death due to electric shock! 

 
 

DANGER! (For babies and children) 

Dispose of or store any packaging material properly! Packaging material must be kept out 
of the reach of babies and children due to the 

risk of suffocation

 
Ensure that children never use the appliance unattended! In addition, make sure that 

children do not remove (small) parts from the device, as they could suffocate by swallowing 
parts! 

 
 

Hint! (Fire hazard due to overheating) 

The maximum permissible ambient temperature of this device is 

40°C

.   

 

 

Ensure that the unit is placed in a well-ventilated location away from direct heat sources, 

naked flames, combustible materials, and liquids. A minimum distance of 1 m is required. 
 

Do not tape or cover the ventilation slots of the unit, or insert objects into the unit.

 

 

 

Hint! (Operating conditions) 

In advance, it must be clarified with the manufacturer whether the device is also suitable 

for indoor use. (PI20) 
   

 

Never expose the device to direct rain, moisture or liquids, as this can lead to damage.  
 

Vibrations, dust or sunlight can also cause damage, avoid them! 
 

 

Summary of Contents for MS Pro 57D










Reviews: