953.230UK User Manual
Connections and Controls
1.
XLR microphone connector
2.
Aux and Mic signal indicators
3.
Zone 1 paging select button
4.
Zone 2 paging select button
5.
Microphone paging button
6.
3.5mm Aux input jack
7.
Aux output level
8.
Mic output level
9.
Zone 1 speaker output terminals
10.
Zone 2 speaker output terminals
11.
DC power adaptor input
Speaker connections
Connect speakers to the Zone 1 and Zone 2 speaker terminals (9, 10) using 2-core speaker cable.
The green Euroblock screw terminals may be unplugged from the rear panel for easier connection.
Connect the
“
+
”
terminal to the
“
+
”
connection of the speaker.
Connect the
“
-
”
terminal to the
“
-
”
connection of the speaker.
Each speaker zone output can deliver 30W total at 4
Ω
.
This means that a single 8
Ω
speaker may be
connected to either zone, receiving up to 15W.
Alternatively, 2 x 8
Ω
speakers may be connected in
parallel to either zone, each receiving up to 15W.
Both of these scenarios are shown in the diagram
opposite.
Another option would be to connect a single 4
Ω
speaker to either speaker zone output, which would
receive up to 30W.
Ensure that the combined impedance connected to each speaker output is not lower than 4
Ω
and that
the speakers connected can handle the output power at that combined load impedance.
