AVS Electronics FOGGY, Manual

Page: 28 / 60

- 28 -
Fix the equipment to the plate using the
two supplied M5x10 screws
Input for network power
supply connection
Input for connecting to the
activation system
Outdoor connections
Insert an omnipolar network switch having a minimum distance between the contacts of at least 3 mm in the
electrical installation of the building.
For electric network power supply input, use double insulation cables.
Network connection
L N
F 3
Passing power
supply cables
(1 L - Phase 220V ~
(2) Earthing - Input for earthing
(3) N - Neutral 220V ~
Block the power supply cable to the predefined
fastening point using the supplied cable gland
Passing control and
signal cables
Block the cables to the predefined fastening
points using suitable strips
E
N
G