AVProEdge AC-MX-42X, User Manual

Page: 29 / 44

29
Front Panel Control - EDID Management:
This matrix has 33 factory defined EDID settings. It also has 3 user defined EDID memories. The user EDID
memories are independent to each input and can be set separately. The user defined EDID can be uploaded
using the free PC Control software or RS-232. In addition, you can choose to read the EDID from the de-
sired output and the captured EDID will automatically store and overwrite the EDID in “USER EDID 1” and
will be applied to the selected source.
By default, the matrix is set to a 1080P 2CH SDR EDID, this is to maximize plug and play capability. When
using 4K sources, you will want to define a 4K EDID on each input (or read from the display).
To Change the EDID setting:
1. Press and hold both “Out 1” and “Out 2” buttons for 5 seconds.
All LED flash one time. You are now in EDID management state.
2. In the EDID management state, press the “Out 1” button to toggle to the input you want to set the EDID
for. (1=IN1, 2=IN2, 3=IN3, 4=IN4)
3. Press the “Out 2” button to toggle through the EDID index.
4. Once you land on the EDID you want to use, press and hold the “Out 2” button for 3 seconds. All LEDs
will flash one time indicating success
NOTE: When in the EDID management state, if you are inactive for 10 seconds it will return to the nor-
mal state automatically. All LEDs flash one time.
*You may also copy EDID from any output and apply to any input, simply select “Copy EDID from Output
x” (x=1-4). This will copy the EDID from the display attached and store it into “User EDID 1” and apply it to
the input you have selected.
Front Panel
Display
OUT1 Input
Select Button
OUT2 Input
Select Button
Functional
Mode Button
OUT2 Scaler
Button
NOTE: See next page for diagram showing the EDID list and their corresponding LED lights.