AVProEdge AC-MX-42X, User Manual

Page: 28 / 44

Front Panel Control - Scaling in Matrix Mode
The AC-MX-42X has a scaler built into output 2. When the AC-MX-42X is in MATRIX Mode there are two
options available for down-scaling.
·
4K/8K > 2K (takes a 4K or 8K signal and down-scales to 2K), LED is flashing.
·
8K > 4K (takes an 8K signal and down-scales it to 4K), LED is solid.
28
Front Panel Control - Scaling in DA Mode
When the AC-MX-42X is in DA Mode there are three options available for down-scaling on OUT2.
·
Off - No scaling applied, LED is off.
·
4K/8K > 2K (takes a 4K or 8K signal and down-scales to 2K), LED is flashing.
·
8K > 4K (takes an 8K signal and down-scales it to 4K), LED is solid.
Audio Output
You can extract audio from toslink or balance 2CH Audio. Audio outputs are an un-decoded output. This
means that what goes in, is what goes out.
1. 2CH Analog Port - Supports 2CH PCM audio only, which is ideal for 2 Channel systems and zoned
audio systems.
2. Toslink Audio Port - Supports PCM, LPCM (up to 7CH), Dolby Digital, Dolby Digital Plus, DTS, DTS-
HD, DTS Master Audio, which is ideal for multi-channel audio systems and older AVR ‘s that do not
support higher bandwidth A/V signals.
3. Need to down-mix for combination, uncompressed and 2CH systems? Check out the AXION series of
matrices for down-mixing options. https://www.avproedge.com/
NOTE - The 2CH Analog port and the Toslink port are mirrored. If the audio codec coming into the
AC-MX-42X is above 2-Channel, the Analog port will be silent, however the audio will still come
out of Toslink.