AVProEdge AC-MX-42X, User Manual

Page: 15 / 44

15
WebUI: I/O Config - Input Settings
Input Settings Label - Use this to give an name/alias to your inputs (Apple TV, Cable Box, Roku, etc).
Note: There is a 15 character limit to this field, the name will replace the default “IN #” throughout the rest
of the WebUI (for instance the Video Matrix tab).
Input Settings EDID -
Use these four drop-downs to select your preferred EDID.
The available combinations are as follows.
1. 1080P_2CH
2. 1080P_6CH
3. 1080P_8CH
4. 1080P_3D_2CH
5. 1080P_3D_6CH
6. 1080P_3D_8CH
7. 4K30HZ_3D_2CH
8. 4K30HZ_3D_6CH
9. 4K30HZ_3D_8CH
10. 4K60HzY420_3D_2CH
11. 4K60HzY420_3D_6CH
12. 4K60HzY420_3D_8CH
13. 4K60HZ_3D_2CH
14. 4K60HZ_3D_6CH
15. 4K60HZ_3D_8CH
16. 1080P_2CH_HDR
17. 1080P_6CH_HDR
18. 1080P_8CH_HDR
19. 1080P_3D_2CH_HDR
20. 1080P_3D_6CH_HDR
21. 1080P_3D_8CH_HDR
22. 4K30HZ_3D_2CH_HDR
23. 4K30HZ_3D_6CH_HDR
24. 4K30HZ_3D_8CH_HDR
25. 4K60HzY420_3D_2CH_HDR
26. 4K60HzY420_3D_6CH_HDR
27. 4K60HzY420_3D_8CH_HDR
28. 4K60HZ_3D_2CH_HDR
29. 4K60HZ_3D_6CH_HDR
30. 4K60HZ_3D_8CH_HDR
31. FRL10G_8K_2CH_HD
32. FRL10G_8K_6CH_HD
33. FRL10G_8K_8CH_HD
NOTE: If you select USER1 EDID, then drop-downs change to allow you to select from and output to
copy from. You can select any of the 4 HDMI outputs then click the COPY button (this replaces the Apply
button). This will save that outputs EDID to the USER1 slot.
Input Settings Signal - The Signal Indicator on the HDMI INPUTS shows the current state of the
connection HDMI source. Green means the HDMI source is detected, red means that the source is not
detected. If red verify that source is powered on and that the HDMI cable is
properly connected to the source and to the back of the matrix.