AVPro Edge AC-MX-44HDBT, User Manual, Page: 20 / 57

Output Settings State - This drop-down has 3 settings, just
like the input settings and HDMI outputs you can Enable or
Disable this port. In addition you can also choose Test Pattern
to enable a 1080P color bar test pattern on that output. This
is helpful in verifying the signal chain from Matrix to sync (dis-
play). To disable the test pattern, change the state back to
Enabled (default).
Output Settings Video Scaling - The HDBaseT outputs can
down-scale a 4K signal to 1080P. This scaling only changes
the pixel density, it does not alter frame rate or color space.
The other setting is ICT Mode (default), AVProEdge’s Invisible
Compression Technology designed to work with a compatible
AVProEdge HDBaseT Receiver (RX).
Output Settings Bitstream Audio -
This is an enable/disable switch. By default
this will be Enabled/Green. To change the setting simply click to switch. Disabled/
Red there will be no Audio passed on that HDBaseT output.
Output Settings Signal - The Signal Indicator on the HDBaseT outputs shows the current state of the
connected HDBaseT Receiver. Green means HDBaseT receiver is detected, red means that the receiver is
not detected. If red verify that the category cable is properly terminated on both ends, and properly con-
nected to both the matrix and the HDBaseT receiver.
WebUI: I/O Config - Output Settings Cont.
Output Settings Video Scaling - The HDMI outputs can up-scale a 1080P signal to 4k. This scaling only
changes the pixel density, it does not alter frame rate or color space.
Output Settings Bitstream Audio - This is an enable/disable switch. By default this will be Enabled/
Green. To change the setting simply click to switch. Disabled/Red there will be no Audio passed on that
HDMI output.
NOTE: This setting has no affect on the HDBaseT or Extracted Audio output.
Output Settings Signal - The Signal Indicator on the HDMI OUTPUTS shows the current state of the
connection HDMI Output. Green means HDMI sync is detected, red means that the sync is not detected. If
red verify that the output is powered on and that the HDMI cable is properly connected to the sync and to
the back of the matrix.
20
Off
Disabled
On
Enabled