2. Click
Up g rad e
.
NOTE: When the Enable IQ Auto update option is enabled in the IQ Status dialog box, IQ module
firmware is automatically upgraded when the switch firmware is upgraded or when a new IQ module is
discovered by the switch after a firmware upgrade. IQ modules that have already been discovered but
which are not attached to the switch during the firmware upgrade must be upgraded manually.
3. In the IQ
Up g rad e
dialog box, click
O K
to initiate the upgrade and return to the IQ
S tatu s
dialog box.
To return an IQ module to factory default status:
1. Click
IQ
in the
Version
dialog box.
2. Select an IQ module, then click
Decom m ission
.
3. Click
O K
to restore factory defaults. The IQ module goes offline briefly and returns.
- or-
Click
X
or press
Escap e
to cancel the operation.
4. Click
X
to close the IQ
S elect
dialog box.
Vertiv
| Avocent® AutoView™ 2108/2216/3108/3216 Switch Installer/User Guide |
25