Avocent SPC 800, Installation & User Manual

Page: 32 / 52

26
SPC Installer/User Guide
To delete port access for a username:
At the SPC: prompt, type del port , optionally followed by a username
and a port name. Press Enter .
- or -
Type
del port all . Press Enter .
If you omit a username, you are prompted for it (Username:). If you omit a port
name, you are prompted for it (Port Name:).
If you enter an invalid username or port name, the command aborts
with the message:
0 port(s) deleted. Command Completed Successfully
Deleting a username
The Del User command removes a username. You cannot delete the
predefined usernames Admn, Gen1 or Gen2. When the command completes
successfully, the following message appears:
0 port(s) deleted Command Completed Successfully
To delete a username:
At the SPC: prompt, type del user , optionally followed by a username. Press Enter .
If you omit a username, you are prompted for it (Username:).
If you enter an invalid username, the command aborts with the message:
Name entered is NOT valid .
Displaying port information
The List Port and List Ports commands display information about one or all
ports, respectively. This information includes:
•
Descriptive port name, if applicable
• Group name assigned to the port, if any
• Usernames who may access the port
When requesting information about all ports, the display begins with port
A1’s information, followed by a prompt to either continue with the next port’s
information or quit the display. If you choose to continue, port A2’s information
is displayed, followed by a prompt to continue or quit. You may choose to quit
at any time. After the information for all ports has been displayed, or after
quitting, you are returned to the command prompt.