Avocent SPC 800, Installation & User Manual

Page: 24 / 52

18
SPC Installer/User Guide
describes each command. The letter (A) indicates an administration command
and (O) indicates an operations command.
Command Summary
Command (Type) Description
Add Port (A) Grants a username access to one or all ports
Add User (A) Adds a username
Admnp (A) Grants or removes administrative privileges for a username
Del Port (A) Removes access to one or all ports for a username
Del User (A) Deletes a username
Iload (O) Displays the total cumulative input load
List Port(s) (A) Displays information about one or all ports
List User(s) (A) Displays information about one or all users
Login (O) Brings up the Username: prompt
Off (O) Turns one or more ports off
On (O) Turns one or more ports on
Quit (O) Ends a session
Reboot (O) Reboots one or more ports
Set Location (A) Specifies a descriptive field for the control screen and login banner
Set Password (A) Changes the password for a username
Set Screen (A) Enables or disables a confirmation query for control screen
operations that change a port’s state
Set Show (A) Enables or disables Show command access for a username
Show (O) Displays the control screen
Status (O) Displays the on/off status of one or more ports
Version (O) Displays the SPC firmware version
To display the names of commands that you may execute:
At the command prompt, press Enter . A list of valid commands for your
username appears.
Operations Commands
Operations commands manage SPC port states, provide information about the
SPC environment and control session operations.
For most operations commands that affect port states, you may specify multiple
port names on one command line, separated by a space or a comma, to a
maximum of 50 characters.