Avocent Cyclades ACS 5000 SERIES, Command Reference Manual, Page: 86 / 152

78 Cyclades ACS 5000 Advanced Console Server Command Reference Guide
• 0 : specific trap
• \"\" : host-uptime
• .1.3.6.1.2.1.2.2.1.2.1 :interfaces.iftable.ifentry.ifdescr.1
• s : the type of the next field (it is a string)
• \"<message - max. size 250 characters>\"
The following example sends a Link Down trap to a server at 10.0.0.1 with message carrying the
current date, the hostname console server and the message received from the source.
Sending a message to a remote syslogd server
destination d_udp { udp("<remote IP address>" port(514)); };
The following example sends syslogs to syslogd located at 10.0.0.1 :
Connecting sources, filters and actions
To connect the sources, filters and actions use the following statement. An action is an incoming
message from one of the listed sources. A match for each of the filters is sent to the
listed destination.
log { source(S1); source(S2); ...
filter(F1);filter(F2);...
destination(D1); destination(D2);...
};
where,
• Sx - Identifies the defined sources.
• Fx - Identifies the defined filters.
• Dx - Identifies the defined actions or destinations.
Examples of connecting sources, filters and actions:
• To send all messages received from local syslog clients to console.
log { source(sysl); destination(d_console);};
• To write all messages with levels info, notice or warning and received from syslog clients
(local and remote) to /var/log/messages file.
destination d_trap {
pipe("/dev/cyc_alarm"
template("snmptrap -v 1 -c public 10.0.0.1 public \"\" \"\" 2 0 \"\"
\\ .1.3.6.1.2.1.2.2.1.2.1 s \"$FULLDATE $HOST $MSG\" "));
};
destination d_udp1 { udp("10.0.0.1" port(514)); };