manualshive.com logo in svg

Avocent AutoView Wireless, Installer/User Manual, Page: 46 / 56

Share
Download
Avocent AutoView Wireless Installer/User Manual Download Page 46

36

        AutoView 1400/1500/2000 Installer/User Guide

•

In the selected COM port Advanced Port settings, verify that the FIFO buffers are selected and 
that the receive buffer is set to High. 

CAUTION:

 

While upgrading, do not use your computer for anything else or switch between windows. Close all 

other windows if necessary. If the upgrade was unsuccessful (such as during a power outage), repeat 
the procedure. 

Upgrading the AVRIQ module firmware

The AVRIQ modules can be upgraded individually or simultaneously. 

NOTE:

 IAC modules are not upgradable.

To simultaneously upgrade multiple AVRIQ modules:

1.

Press 

Print Screen

.

 The Main dialog box will appear.

2.

Click 

Commands - AVRIQ Status.

 The AVRIQ Status dialog box displays.

Figure A.1: AVRIQ Status Dialog Box 

3.

Click one or more types of modules to upgrade. Click 

Upgrade

.

4.

The AVRIQ Upgrade dialog box displays. Click 

OK

 to initiate the upgrade and return to the 

AVRIQ Status dialog box.

Summary of Contents for AutoView Wireless

























































Reviews:

No comments