Avocent AutoView 2000, Installer/User Manual

Page: 15 / 52

Chapter 2: Installation
9
Chapter 2: Installation
Getting Started
Before installing your AutoView appliance, refer to the following list to ensure
you have all items that shipped with the appliance as well as other items
necessary for proper installation.
Supplied with the AutoView 2000
•
AutoView 2000 unit
•
Power cord
•
One null modem serial cable
•
AutoView 2000 Installer/User Guide
•
AutoView 2000 Quick Installation Guide
Additional items needed
•
One AVRIQ module and UTP cabling per attached server or switch
• (
Optional) Rack mounting kit
Rack Mounting Your AutoView
NOTE: Rack mounting kits are sold separately.
Your AutoView appliance may be rack mounted using brackets available
through Avocent. Before installing the appliance and other components in the
rack cabinet (if not already installed), stabilize the rack in a permanent
location. Install your equipment starting at the bottom of the rack cabinet, then
work to the top. Avoid uneven loading or overloading of rack cabinets.
Figure 2.1: AutoView 2000 Horizontal Installation