Avocent AMX 5030, Installer/User Manual, Page: 73 / 248

Chapter 3: Operations
61
Figure 3.28: Edit Device Screen (Seamless Configuration)
6. In the MDM Switch area, select the number of ports on the cascaded KVM switch from the
Ports drop-down list.
7. In the MDM Switch area, select the hotkey sequence of the cascaded KVM switch from the
Hotkey drop-down list.
8. To save changes, click Apply save changes. The IQ module briefly disappears from the list,
then reappears with the MDM target devices that represent each port on the cascaded switch.
9. Repeat steps 3-5 to rename each MDM target device. Click Apply for each MDM target device
on the list.
10. (Optional) Edit additional MDM IQ modules by repeating steps 3-10.
11. Click Close or X to exit the OSCAR interface.
OSD Command Line Operations
The OSD Command Line allows you to enter commands to administer the AMX switching system.
Figure 3.29: Command Line Screen
AMX.book Page 61 Thursday, June 12, 2008 4:14 PM