Avocent AMX 5030, Installer/User Manual, Page: 64 / 248

52
AMX Switch Series Installer/User Guide
Using the Power/Sleep key
Table 3.4 shows the Power/Sleep key on USB servers for Sun and PS/2 keyboards. Sun keyboards
have a Power
key used to power the workstation. Some PS/2 keyboards have a Sleep key to place
the server in a stand-by or power saving mode.
To issue the Power/Sleep command:
Enable the Scroll Lock mode and press
F11
(or the
Sleep
key) on a PS/2 keyboard.
-or-
For a Sun server, press the
Power
key.
Using Audio and Serial Data Emulation
Some AMX user stations and devices support audio and serial data emulation. In order for a user to
receive audio and serial data, the following conditions must exist:
• The user must be logged into a user station that supports audio and serial emulation, such as
the AMX 5130 user station.
• The user must be accessing a device that has been enabled by the Administrator to output audio
and serial data.
• The target device must be connected to an AMIQDM module.
Each user can configure the audio and serial settings that will be available when he or she logs in.
To view and modify audio and serial settings for a user:
CAUTION: Switching to an audio source that is set at high volume might harm your hearing.
1. Press
Ctrl+Ctrl
to launch the OSCAR interface.
2. Click the User tab. Click the down arrow button to display the Audio/Serial screen.
NOTE: Selected settings in the Audio/Serial screen indicate a default status of on (enabled).
Table 3.4: Power/Sleep for USB Servers
Keyboard Peripheral Key Scroll Lock Mode Server
PS/2 Shift - F11 Enabled Win 98/2000
F11 Enabled Win 98/Mac
Sleep Enabled Win 98/Mac
Sun Power Enabled Win 98/2000
Power Enabled Win 98/Mac
AMX.book Page 52 Thursday, June 12, 2008 4:14 PM