Getti ng star ted
6
OVATION MA / SA 8.3
10 Ampère) cannot be used. The supplied power cord is
designed for up to 16 amperes. If you wish to replace the
mains cable with another cable, please note that it is appro-
ved for at least 16 amperes and has a suitable coupling on
the device side (IEC-60320 C19).
Connect each output stage to a separate socket. Do not use
power distribution strips, as those are not designed for the
high currents required in total.
If the power amplifiers are in standby mode, they are not
completely disconnected from the mains. To protect your
device from damage, unplug the device during a thunders-
torm or when you are away for a longer period of time or
switch off the device with the mains switch (8).
1.5 First start-up
ℹ
NOTE
If your power amplifiers are still cold after unpacking due to a
previous transport, place them in your listening room for at
least one hour without mains connection so that they can
adapt to the room temperature. Otherwise, condensation
could damage or destroy the unit.
Do not connect any loudspeakers during the initial star t-up.
Turn on the power switch (8). While the AVM logo appears in
the display (3), the amplifier performs a self-test and swit-
ches to standby mode after a few seconds. The power LED (2)
lights up.
