Getti ng star ted
8
OVATION MA / SA 8.3
1.7 Firmware update
The firmware of the MA / SA 8.3 can be updated via the confi-
guration port (11) using a special AVM update dongle. To
update your amplifier, switch it off at the mains switch (8).
Now plug in the dongle as shown in the following figure and
switch on the device again.
Fig. 6. Firmware update with a special AVM dongle at the
configuration por t (11)
The display (3) now shows the version number of the cur-
rently installed firmware in the left section under
current
. On
the right side the version number of the available update is
shown under
new
. With the menu buttons 4a and 4e you may
select whether you would like to star t the process (
UPDATE
)
or cancel it (
EXIT
). After the update has been completed,
switch off the device at the mains switch (8) and remove the
dongle. After restarting, the device starts with the new firm-
ware.
