Appen di x
18
OVATION A 6.3 / 8.3
3.2.1 Device is switched on, but the display is dark
The display brightness is set too dark. Set the display to a dif-
ferent setting (see also 2.2 DISPLAY button and 2.4 Display
brightness).
3.2.2 Device is turned on, but does not play music
First check whether the preamplifier and the selected signal
source are working (e.g. connect headphones).
You have plugged headphones into the preamplifier, which
mutes the outputs.
Check the connection cables between source and preamplifier
and between preamplifier and power amplifier.
Check your speaker cables for an open or shor t circuit.
3.2.3 Device does not switch on or switches to
standby mode while listening to music
This can happen if the power amplifier is in
auto
mode and
you hear at a very low volume level. In this case, the signal
voltage is not sufficient to trigger the automatic. Select the
permanent operating mode instead (see section 2.6 Operating
modes).
If the power amplifier is in
trigger
mode, check the trigger
cables between the preamplifier and power amplifier for a
short circuit or interruption.
