background image

VPN: Remote Access to the Home Network

FRITZ!Box 3390

73

If no other network applications are active, then the 
background applications receive the entire bandwidth.

Prioritization Method in the FRITZ!Box

The following techniques are used in the FRITZ!Box to send 
data packets according to their prioritization:

Change in the order in which packets are sent to the In-
ternet (upstream direction)

The order of the packets the FRITZ!Box receives from the 
Internet (downstream direction) cannot be changed.

Discard low-priority packets in order to ensure the trans-
mission of higher-priority packets.  This technique is 
used whenever more packets are supposed to be sent to 
the Internet than the upstream transmission rate of the 
Internet connection allows.

As long as no packets are being sent from higher-priority 
applications, the full transmission rate of the Internet 
connection is available for low-priority packets.

Setting Up Prioritization in the FRITZ!Box

1.

Enable the advanced view.

2.

Prioritization is set up in the “Internet > Filters / Prioriti-
zation” menu.

11.6

VPN: Remote Access to the Home Network

Via VPN a secure remote access to the network of the 
FRITZ!Box can be established. The VPN solution for the 
FRITZ!Box features the following:

The VPN solution for the FRITZ!Box is based on the IPSec 
standard.

Computer-LAN coupling and LAN-LAN coupling: VPN con-
nections can be set up for individual remote computers 
or even for remote networks.

A maximum of eight simultaneous active VPN connec-
tions is supported.

Summary of Contents for Fritz!Box 3390






















































































































































Reviews: