Want the latest product information?
Visit
www.avlite.com
11
7.0 Unpacking, Installation and Wiring
7.1 Unpacking
Unpack all hardware and inspect for damage. If there is any damage, please contact your Avlite Office.
Retain original packing material for possible future use in shipping.
7.2 Installation and Wiring
Open the LI fixture. Please see section 'Opening and Closing the LI' for further information.
Connect the provided input power cable according to DC installations as shown in the wiring diagram on the following
page.
Note:
The fixture must be wired by a qualified electrician.
Thread a 3/4 inch pipe thread cord grip to the LI and attach the light to an owner supplied bracket or optional Avlite
Right Angle Mounting Bracket (for low intensity fixtures) with a locking nut.
Note: Make sure the mounting pole is vertically aligned to guarantee the required beam pattern of the obstruction
light. Make sure the light’s beam pattern is not disturbed by any nearby obstacles
WARNING:
LED lights contain glass components. Do Not Drop.
Always follow the instructions outlined in the product manual when cleaning the
equipment. Improper cleaning methods and use of unauthorized cleaning agents
can damage equipment.
WARNING:
Do not stare into light emitting diode (LED) beams.
WARNING:
DO NOT connect directly to an unregulated power source. Connecting to an unregu-
lated source may result in damage.
