48
6.5
CHANNEL SEARCH
Enter the Main Menu by pressing the MENU key, press the DOWN key and move the cursor to “Install”,
press the OK key to confirm. The “Install” allows the user to search the channel. You have to input the
pin code before you enter the installation menu. The default value is “0000”.
6.5.1 Manual
Search
Select Manual search mode while the installation mode item is highlight. Input the preferred frequency
by press “0…9” number key on the remote control. Press LEFT/RIGHT key to select the preferred
bandwidth after you set the frequency. You also could set the antenna power supply for the flat
antenna if it is necessary. Press OK key to start manual search after setting preferred parameters.
The entire TV program and radio program should be listed on the menu and search successful
massage also would display. Press OK key or EXIT key to exit the manual search mode.