AAQ Controller Interface Panel (CIP)
24
3.4.28.
Set Scan Width and Offset Screen
Figure 40 - CIP Set Scan Width and Offset Screen
Use the left, right, up, and down keys to edit values and use the go key to select the next configuration item. To
cancel the edit session and exit the screen, press the stop key 3 times. To save the new values and exit the screen,
press the stop key AND the go key simultaneously.
XXX↓
3.4.29.
Versions Prompt Screen
Figure 41 - CIP Versions Prompt Screen
The Versions Prompt Screen provides the option for checking the version information of the system. From the
Versions Prompt Screen, press the go button to navigate to the Versions Screen (Figure 44), or press the down button
to navigate to the Show Movements Screen. Note that from any of the Extended Technical User
Prompt
Screens,
return to the Limited User Screens can be obtained by pressing the stop key eight (8) times.
√
3.4.30.
Versions Screen
Figure 42 - CIP Versions Screen
Use the up and down buttons to view component version numbers. To exit the Versions Screen, press either the
stop or the go button.
X↓
