To change the TSL configuration of a particular module, perform the
following steps:
1.
Click
TSL
and when the following screen appears, ensure that
Enable
is
selected (with checkmark). If it is unchecked, only static labels will be
displayed.
2.
Specify the
Display Address
(ranges from
0
to
126
). The address should
match the TSL controller configured address corresponding to the router
output feeding the corresponding Avitech input.
3.
If you want to display dynamic labels then click the radio button to select
TSL Only
. If you want to display both the static and dynamic labels, click
the radio button to select
Allow Both Static & Dynamic
.
4.
To display 8 or 16 dynamic characters (in case the TSL implementation
allows it), click the radio button to select the corresponding options. This
concludes the TSL setup on the module level.
NTSC Black Level
Allows you to set the NTSC black level by selecting
0 %
or
7.5 %
. Default
setting for the
NTSC Black Level
is
7.5 %
.
NOTE:
Only supports composite video input source.
61
Summary of Contents for MCC-8004 series
