Door Lock/Un lock
CAU TION: Be sure to ver ify the type of door lock sys tem you are work ing with.
Some types of door lock sys tems re quire op tional re lays, for ex am ple, re verse
po lar ity type door locks. Refer to the diagrams on pages 10 & 11.
The system can operate both negative and positive door locks. When the
alarm is remotely armed, the BLUE/WHITE wire provides a negative
output. At the same time, the GREEN/WHITE wire provides a 300 MA
positive output. When the alarm is remotely disarmed, the GREEN/WHITE
wire provides a negative output. At the same time the BLUE/WHITE wire
provides a 300 MA positive output.
Hood/Trunk Pin Switch
1. Locate the vehicle hood and/or trunk pin switch that show ground when
the hood or trunk is open only.
2. Connect the alarm module to the vehicle hood and/or trunk pin switch
wire.
3. If the vehicle does not have a hood or trunk pin switch, install an alarm
pin switch and connect it to the alarm module TAN wire.
Si ren
1. Choose a location in the engine compartment away from high heat
engine components, moving parts and direct exposure to water.
2. Make sure the siren and siren wires cannot be seen or reached from
below the vehicle.
3. Mount the siren with the two self tapping screws to a solid metal
surface.
4. Connect the siren BLACK wire to the alarm module VIOLET wire.
5. Connect the siren RED wire to the alarm module RED wire.
9
Hurricane
2
/AMX78 (2) Installation Manual
