8
Measuring Object/Liquid Temperature
1. Press the Power button for 1 second to switch the thermometer on.
Following a successful self-test, the device emits two short beeps.
2. Then press the “Memory” and “SET” buttons simultaneously
for 3 seconds to switch to the object measurement mode.
3. Point the sensor tip towards the object or liquid (maintaining a
distance of 3 cm), then take one press on “Forehead Measurement”
button or “Ear Measurement” button to take a measurement
(never immerse in liquids).
4. After the measurement process is complete, there comes a short
beep and the measured value appears on the display.
5. Please note that the displayed temperature is the measured and
not the adapted surface temperature. It is not the same as the
temperature.
6. To switch to the other thermometer mode, press the “Memory”
and “SET” buttons simultaneously for 3 seconds.
