9
Setting °C/°F and Date/Time
When the thermometer is used for the first time and each time the
batteries are changed, the date and time are displayed in the format “1
- 1 00:00” during the basic set-up (after the self-test). Set each of the
following settings in turns: nit in which the temperature will be
displayed, date and time. To set the device, proceed in stages:
Unit – year – month – day – hours – minutes
After installs batteries (first time to use). The device performs a brief
self-test: all elements of the display are shown for approx. 1 second.
Following a successful self-test, the device emits two short beeps. In
Standby mode, the date and time are shown and
“--” is displayed.
Enter into Setting
Under power-on condition, press "Set" button for
5 seconds to enter into setting mode.
°C / °F
When the unit blinking, press the “SET” button
to change the unit. Press the “Memory” button
can save and confirm the unit, then goes to next
setting.
Year
When the year Icon blinking, press the “SET”
button to change the number. Press the
“Memory” button can save and confirm the
year, then goes to next setting.
Month
When the month Icon blinking, press the “SET”
button to change the number. Press the
“Memory” button can save and confirm the
month, then goes to next setting.
Day
When the day con blinking, press the “SET”
button to change the number. Press the
“Memory” button can save and confirm the day
then goes to next setting.
