Avision DL-2011B, User Manual

Page: 29 / 184

User’s Manual
2-10
N
OTE
:

The VSL program allows multiple users to connect to the
network scanner at anytime. Yet, the scanner operation
can be used by one user at a time. If the network
scanner is being used by other user, you will be
prompted with a message to connect the scanner later.
When the scanner is available, you will also be prompted
with a message to connect the scanner and start
scanning your document.

If the network scanner has not been found, it is probably
the scanner and your computer are not in the same LAN.
In this case, you can assign a specific IP address of the
scanner to let [Virtual Scanner Link] automatically search
the scanner. Click the [Option] button, type your IP
address on the [Searching Address] field (1) , then click
the [+] button (2) and finally click [OK] (3) to complete.

Searching Time: When the program is launched, it
automatically searches the scanner in the network in 5
seconds (default). The searching time can be changed
from a range of 5 to 20 seconds.

If the [ Virtual Scanner Link ] program has been closed
and then launched again, [ Virtual Scanner Link ] will
automatically search and connect the network scanner it
has previously connected to.
(1)
(3)
(2)