Avision DL-2011B User Manual Download Page 178

Page: 178 / 184

User’s Manual

9-6

Question:

More than one sheet of paper are

fed into the scanner.

Answer:

1) Open the scanner front door.
2) Remove the multi-fed sheets.

3) Close the front door.

4) Flatten the corners and edges.

Loosen the paper before putting it

into the paper guide again.

5) Check the feeding roller condition.

If necessary, follow the cleaning

directions in section 8.2 and

perform the cleaning.

Question:

Paper becomes skewed in the

scanner.

Answer:

1) Use the slide guide to keep the

paper path straight.

2) Check the condition of the feeding

roller. If necessary, follow the

cleaning directions in

Section 8.2

and perform the cleaning.

Summary of Contents for DL-2011B

























































































































































































Search results

Summary of Contents for DL-2011B

Reviews:

Related manuals for DL-2011B

Brands by name

Popular brands

Avision DL-2011B, User Manual

Search results

Summary of Contents for DL-2011B

Reviews:

Related manuals for DL-2011B

Brands by name

Popular brands