manualshive.com logo in svg

Avision DL-0906H, User Manual

Share
Download
Avision DL-0906H User Manual Download Page 138

   

   

130

Cleaning the ADF   

 
 
From time to time the pad assembly and feeding rollers may become contaminated 

with ink, toner particles or paper dust. In this case the product may not feed 
documents smoothly. If this occurs please follow the cleaning procedures to return 

your machine to its original state.   
   

 

1.

 

Moisten a clean lintless cloth with isopropyl alcohol (95%).     

2.

 

Pull the ADF Release button. 

3.

 

Gently open the ADF front cover. Wipe the feeding rollers from side to side. 

Rotate the rollers forward with your finger and repeat the above cleaning 
procedures until the rollers are clean.    Be careful not to snag or damage the 

pick springs. 

4.

 

Wipe the black part of the ADF snap-in pad.   

5.

 

Close the ADF unit.    Your machine is now ready to use. 

 

   

       

 

 
 

 

 

ADF Pad 

 

ADF Rollers 

 

Pick Spring

 

Summary of Contents for DL-0906H




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands