LED Indicators
The following tables describe what the LEDs on the Network Video Recorder indicate.
Diagnostic Indicators
The diagnostic indicators on the front panel highlight system issues during system startup.
Note:
The diagnostic indicators only light-up when the recorder is powered.
LED Indicator
Description
System health
and System ID
l
Steady blue — The system is powered on and healthy. System health mode is active.
l
Blinking blue — System identification mode is active.
l
Steady amber — The system is in fail-safe mode.
Note:
If the system health indicates a degraded or critical state, contact
Avigilon Technical Support for assistance.
l
Blinking amber — The system is experiencing a fault. Check the System Event Log.
For more information, see
System Health and Identification Modes
Hard drive
l
Steady amber — The hard drive is experiencing an error. Check the System Event
Log.
Temperature
l
Steady amber — A thermal error has occurred.
Possible errors include:
l
Temperature out of range
l
Fan failure
Check that the fans are functioning correctly and the air vents are not blocked.
Electrical
l
Steady amber — An electrical error has occurred.
Possible errors include:
l
Voltage out of range
l
Failed power supply
l
Voltage regulator
Check the power status indicator to confirm if it is an issue with the power supply,
and reseat the power supply unit, if the error persists.
LED Indicators
24
