2. Ensure the DC output jumper is set to 24V (as circled below).
$"65*0/
Failure to set the FPO75’s DC output jumper to 24V will likely result in damage to the
system and will void the warranty.
3. Connect the inputs on the FAI (Fire Alarm Input) to the building’s fire alarm system, as required. See the
FPO Quick Start Manual (page 3 – FAI Input Usage) for more detail. Further information is available at:
http://lifesafetypower.com/docs/im_fpo.pdf
.
4. Either:
l
If a backup battery is used – move the jumper to position 1, as shown below.
l
If no backup battery is used – move the jumper to position 2.
10
Setup the FPO75 Power Supply Board
