600-00178-000 Rev 00-I -
34-
MLB700 Broadcast Datalink Receiver
Possible Failure Error
The messages in this section below
should not appear on the remote, but
may do so if there is a failure in the
MLB700 or in the RC70 remote
control.
Bad Command Syntax
This message will be displayed if the
parameters in a command sent to the
MLB700 by the RC70 remote were
incorrect.
Command Failed
This message indicates that the
MLB700 has discovered a problem and
cannot identify its source.
Internal Error <#>
This message is returned if the error
number is not expected. The number
can be checked against the MLB700
SSP specification.
Table 3. Special Display Messages