600-00178-000 Rev 00-I -
13-
MLB700 Broadcast Datalink Receiver
Operation
First Power Up
The first power up will tune to channel 184. After that, the
MLB700 radio will retain the last tuned channel in non-volatile
memory.
Pairing Your Remote with the MLB700
The first time you power up your remote, you need to pair it with
the MLB700. To pair the RC70 remote with the MLB700:
1.
The MLB700 attempts to pair with a remote control
immediately following power-on initialization. Apply power
to the MLB700. If power is already applied, then remove
power for at least three seconds and then reapply power.
2.
The remote’s LCD displays “SIRIUS RADIO HAS NOT BEEN
SETUP…PUSH OK TO SET UP…”.
3.
Press the
OK button. The LCD will display “Time
Out”. Press the
OK button again until the LCD
displays “SUCCESS!”. You may have to press the
OK
button up to 8 times. If the RC70 Remote does not pair
by the 8
th
try, restart the MLB700 and try again.
4.
Once pairing is complete, the LCD displays “SUCCESS!
RADIO AND REMOTE ARE NOW PAIRED”. Then the LCD
displays “PRESS SIRIUS TO LISTEN TO MUSIC.
5.
Press
SIRIUS button.
You can now use the RC70 wireless remote to control your
MLB700.
