manualshive.com logo in svg

Avidyne FlightMax EX500, Pilot'S Manual, Page: 155 / 184

Share
Download
Avidyne FlightMax EX500 Pilot'S Manual Download Page 155

Map Symbols

600-00078-001 Rev 05

-143-

Avidyne EX500/EX600 MFD

11.9 Map Symbols

11.9.1

Heading, Track, and Map Orientation

The Heading/Track (H/T) Block provides digital readout of the current 
heading, or actual track. Three triangles around the compass range 
ring provide actual track, desired track, and heading indications. The 
Map orientation is indicated in the triangle to the right of the H/T 
Block.

11.9.2

Map Symbols—Navigational Fixes

The EX500/EX600 can display the following database items:

●

Airports

●

Navaids (VORs, NDBs and Waypoints)

●

Airways (Victor and jet)

●

Intersections, waypoints and other named fixes

●

Class B and Class C controlled airspace

●

Tower Zone (Class D) Airspace

●

Obstacles (>200’ AGL)

●

Certain classes of special use airspace (Prohibited, Restricted, 
Warning, Alert and Military Operating Areas)

 Table 11.4

Track Indicator Graphics

Heading

Track

Map Orientation

Heading

Desired 
Track

North Up

Track

Heading

Heading Up

Actual Track

Track Up

Summary of Contents for FlightMax EX500

























































































































































































Reviews:

No comments