manualshive.com logo in svg

Avidyne FlightMax EX500, Pilot'S Manual, Page: 147 / 184

Share
Download
Avidyne FlightMax EX500 Pilot'S Manual Download Page 147

Updating Your Databases

600-00078-001 Rev 05

-135-

Avidyne EX500/EX600 MFD

This section describes how to move data from a portable USB device 
(a 250MB Zip Drive or USB Flash Memory Drive) to the EX500/
EX600.  

Note:

When removing the cap from the data port, pull the cap 
gently 

from the right

 until it pops out. Make sure the cap is 

all the way out before plugging anything into the USB port.

 

 

Do not pull too hard on the tab that attaches the plug to the 
EX500/EX600, as this could separate the plug from the 
EX500/EX600 bezel.

! 

If using a Zip Drive Dataloader:

• Do not let the portable Zip Drive dangle by the cable. It 

can result in damage to your MFD or the Drive, as well as 
a dataload failure.

• Do not insert the Zip disk into the Zip Drive until the 

FlightMax logo screen is displayed on the MFD. The disk 
may be damaged if it is already in the Zip Drive when 
power is applied. 

• After loading the CMax data into your MFD, wait until the 

disk is ejected from the drive before unplugging the Drive, 
or powering off the MFD. Unplugging the Zip Drive with 
the disk still engaged may cause damage to the disk.

! 

If using USB Flash Memory:

• Avidyne strongly suggests that, to avoid confusion, you 

reserve a USB Flash Memory Drive solely for EX500 
database transfers. If you use both NavData and CMax, 
keep two USB Flash Memory Drives, one for each update.

• After uploading data, do not remove the USB Flash 

Memory Drive until you see and acknowledge the regular 
EX500 Startup screen. A system reboot may occur if you 
remove the USB flash drive before the startup screen is 
displayed.

Summary of Contents for FlightMax EX500

























































































































































































Reviews:

No comments