Avidyne 700-00004 Series, Installation Manual, Page: 61 / 132

EX5000 Installation Manual
P/N 600-00073 Rev 24
- 51 -
5.7.7 TIS Setup
The EX5000 optionally supports the display of traffic information from a Garmin GTX-330 TIS-capable
Mode-S transponder.
Note:
This option is available on 530-00148-000, 530-00162-(), 530-00170-(), 530-00180-(), and
530-00195-() software.
➤
To set up the TIS Traffic Sensor:
1. From the Maintenance Mode Page, select Traffic Setup. The Traffic Setup Page displays:
Figure 15: TIS selection on Traffic Setup Page
2. Set the following options:
■
Sensor— TIS-G
■
Port— Select the MFD ARINC 429 port to which the TIS transponder is wired.
3. When you are done, press Save . Press Cancel to exit without saving changes.
4. Changes do not take effect until the MFD has been restarted. From the Maintenance Mode Page,
press
Restart System . If needed, see Table 22, “Traffic Messages,” on page 52.
5.7.8 TIS Checkout
Use a TIS transponder test set to test the combined installation of GTX-330 and the EX5000. If no test
set is available, conduct operations in an area that supports TIS data and verify that data is received
and traffic is displayed.