Chapter 4: Live Recording and Playback
37
5
Do the following to create the Snapshot with
the Pro Tools inputs active:
• Create a new Snapshot and name it.
– and –
• Recall the new Snapshot by clicking the
Recall
button.
6
Go to the Patchbay page and, under the
Inputs
tab, click
Pro Tools
.
7
Patch the Pro Tools channels you want to use
for Virtual Soundcheck to your console’s input
channels and click
Assign
.
8
Go back to the Snapshots page and click
Store
.
9
Make changes to your mix while playing back
Pro Tools audio, including channel input gain
settings.
10
Go back to the Snapshots list and click
Store
to store any changes, including the input patch,
made while the Pro Tools inputs are active.
11
You can recall the previous Snapshot to go
back to your live Stage Inputs. Changes made
while working in the Snapshot with Pro Tools
inputs active carry over when you switch back
to the Snapshot with live Stage inputs active.
Naming the Virtual Soundcheck Snapshot
Double-check to make sure you are editing
the correct Snapshot. The most recently re-
called Snapshot is either green or yellow in
the Snapshots list.
Naming the Snapshot
Patching FWx inputs to console input channels
Channel input gain from Pro Tools will al-
ways be 3–6 db lower than your Stage in-
puts input gain, depending on recording lev-
els. You may have to adjust the input gains
for the Pro Tools inputs to approximate the
levels of the live Stage inputs.