Step 1a (Direct Connect)
•
Place the Engine in its physical location. (E.g. Rack mount).
•
Connect power cables, keyboard, monitor, and mouse.
•
Connect Ethernet network cables to the ISIS using the diagram below.
•
Continue with Step 2 (page 5).
Rear view of the ISIS Engine.
Do not use the middle two Ethernet ports. They are reserved for Storage
Engine Resiliency.
If you have purchased the optional 4-port Ethernet board, see the
ISIS 5000 Setup Guide for installation instructions.
To Clients
Connect four
Ethernet cables to
the outside ports.
x
x
2
For different wiring topologies please refer to the Setup Guide located in the
software kit, or via download at: http://www.avid.com/US/support. Click the link
titled Knowledgebase on the right side of the screen and search for ISIS 5000
Setup Guide.
Hardware Setup