![background image](http://html1.mh-extra.com/html/avid-technology/bbdb/bbdb_service-manual_3031185007.webp)
STEP 3: INSTALL PAD SPACER
Turn out the inboard adjuster (counter-clockwise)
until there is enough clearance between the pads
for a 2mm pad spacer. Insert the spacer, then
turn in the inboard knob (clockwise) until it stops.
Check the torque arm for movement. If it moves,
turn the footscrew clockwise until it is secure.
NOTE:
If you need to fabricate a pad spacer, be sure
to use cardboard or something similar that
will not damage the surface of the friction
material.
TYPE F
TYPE N
STEP 4: REMOVE TORQUE ARM
A. Place your thumb over the spring loaded
torque arm as shown and hold securely.
B. Remove the torque arm fixing nut using an
11mm wrench.
C. While continuing to hold the torque arm,
remove the indexed washer and flat washer.
5