![background image](http://html1.mh-extra.com/html/avid-technology/bbdb/bbdb_service-manual_3031185020.webp)
STEP 23: INSTALL TORQUE ARM
TYPE F -
Install the torque arm by first engaging
the spring tab into the hole on the back side of
the arm, then pressing the arm onto the flats of
the drive cam shaft. Make sure the arm is fully
seated, and hold it firmly in place with your
thumb.
NOTE:
Proper orientation will place the top of the
torque arm just below the bottom truss bolt.
TYPE F
TYPE N
TYPE N -
Install the torque arm, aligning the
spring adjuster tab and screw with the relieved
area on the back of the torque arm. When
engaged correctly, the spring adjuster screw will
be driven against the shelf on the back of the
torque arm. Press the torque arm onto the flats of
the drive cam shaft. Make sure the arm is fully
seated and hold firmly with your thumb.
NOTE:
Proper orientation on a 2002 MTB caliper will
place the top of the torque arm just below the
bottom truss bolt. If working on a ROAD
caliper, the torque arm will be directly in front
of the truss bolt.
18
MTB Caliper
Road Caliper