![background image](http://html1.mh-extra.com/html/avid-technology/bbdb/bbdb_service-manual_3031185013.webp)
STEP 1: INSTALL INNER BODY SEAL
Orient the inner body seal with the groove facing
down, then insert it into the main body bore.
Locate the seal into its recess and seat it
completely with your finger.
Assembly
STEP 2: GREASE THE BODY
Very lightly
grease the entire body bore,
including the lockring threads, the inner pressure
foot threads, and the inner knob detents.
STEP 3: INSTALL INNER PRESSURE
FOOT
Drop the inner pressure foot in through the main
body bore, then thread it in counter-clockwise
until it bottoms out.
TYPE F
TYPE N
STEP 4: INSTALL INNER KNOB
Install the inboard adjuster knob by lining up the
rectangular tab on the back of the pressure foot
with the hole in the knob, then pressing it on firmly.
11
Groove
Seal Recess