Avid Technology AirSpeed Multi Stream, Installation And User Manual

Page: 119 / 398

AirSpeed Multi Stream Configuration Checklist
119
9. Create a Device Channel for each channel (and each AirSpeed Multi Stream) by
selecting Channel > Device Channels. When creating a device channel for AirSpeed
Multi Stream, make sure that you do the following:
a. Set the Channel name (use a letter such as A, B, or C).
b. Make sure the Device Name is the AirSpeed Multi Stream hostname.
c. Select AirSpeed Multi Stream as the Device Type.
d. Channel Index (AirSpeed Multi Stream has 8 playback channels indexed between 1
and 8, although only up to 6 simultaneous playbacks are supported).
For more information on device channels, see “Device Channels” in Chapter 3 of the
Avid iNEWS Command Administrator’s Guide .
10. When you are done creating device channels, click Apply.
11. Add the channel to a group by selecting Channel > Groups. Use the following
information for AirSpeed Multi Stream.
a. Select the Channel Name (usually A, B, C, D or similar).
b. Add channels for the AirSpeed Multi Stream as desired.
For more information on groups, see “Groups” in Chapter 3 of the Avid iNEWS
Command Administrator’s Guide .
12. When you are done, click Apply, and click OK.
13. In Command, open the Inventory panel (select View, and then Inventory) and check to
see if the clips from the AirSpeed Multi Stream are listed (assuming there is inventory
on the AirSpeed Multi Stream).
For more information, see “Inventory” in the Avid iNEWS Command User’s Guide .
14. (Option) If you are using AirSpeed Multi Stream with a Command server that is in a
different Interplay Framework Workgroup than the Interplay Engine, the AirSpeed
Multi Stream must be configured to join both the Interplay Framework Workgroup and
the Command Framework Workgroup. continue with this procedure to add a
workgroup.