PT
HD SDI Megapixel PTZ Dome Camera Instruction Manual
9/72
MAX. 8 sets of Schedule are programmable. This function is that a camera runs a function such as
Preset, Pattern, Swing or Group at an assigned time. Also this function can be run periodically by pre-
defined schedules.
PTZ(Pan/Tilt/Zoom) Control
With the RS-485 communication connection, MAX. 255 units of cameras can be connected to a
single controller.
Pelco-D or Pelco-P protocols can be selected as a control protocol in the current firmware
version.
OSD(On Screen Display) Menu
OSD menu is provided to display the status of camera and to configure the functions
interactively. A P
assword can be configured in OSD menu and OSD menu can be protected.
The information such as Camera ID, Pan/Tilt Angle, Time/Date, Alarm Input and Preset
information is displayed on screen.
Alarm In/Out Function
3 alarm sensor inputs and 1 alarm sensor outputs are available.
Alarm sensor input is decoupled with photo-couplers to avoid external electric noise and
shock perfectly.
Both of N.O.(Normal Open) sensors and N.C.(Normal Close) sensors can be used and the signal
range of the sensor input is from DC 5.0V to 12.0V for various applications.
The camera can be set to move to a Preset position or to run functions such as Pattern, Swing
and Group when there are external sensor activations. Also Post Alarm function is possible,
which is supposed to activate after user-defined time period and sequentially in succession to
the action by external sensor activations.
Reserved Presets(Hot Keys)
Most camera setup options can be set up easily and directly with the reserved presets (Hot
Keys), without entering into OSD menu. For more information, refer to Reserved Presets(Hot
Keys) in this manual.
Dual Power Input
The input power source is DC 12 V or AC 24 V.
Perfect Outdoor Environment Compatibility and Easy Installation
The fans and heaters are built-in in the camera for cold and hot temperature environment. Also
idealistic mechanical design protects the camera from water and dust. (IP67 when installed
properly with wall mount bracket only / Only for outdoor models)
It is easy to install and repair the camera.
INTRODUCTION
1