PT
HD SDI Megapixel PTZ Dome Camera Instruction Manual
26/72
Group
Function
This function is that the camera memorizes the combination of Presets,
Pattern and/or Swings sequently and runs Presets, Pattern and/or Swings
repetitively. MAX. 8 sets of Group are programmable. Each group can have
MAX. 40 actions which are the combination of Preset, Pattern and Swing.
Preset speed can be set up and the repeat number of Pattern & Swing can
be set up in Group setup. Dwell time between actions can be set up also.
Setting Groups
To set Groups, enter into OSD menu.
Running Groups
Method 1) <Run Pattern> [Group NO. + 20]
Method 2) <Go Preset> [Group NO. + 150]
ex) Run Group 7 : <Run Pattern> [27]
ex) Run Group 7 : <Go Preset> [157]
Deleting Groups
To delete Groups, enter into OSD menu.
Other Functions
Power Up Action
This setting defines a specific activity (Preset, Pattern, Swing and Group) to
be performed in the event that the power to the camera is cycled. This
function enables the user to resume, after turning on power, the last action
being executed before turning off the power. Most of actions such as Preset,
Pattern, Swing and Group are available for this function but Jog actions are
not available to resume.
Auto Flip
In case that tilt angle arrives at the top of tilt orbit(90°), zoom module
camera turns on its axis by 180° at the top of tilt orbit and moves to
opposite tilt direction (180°) to keep tracing targets.
Parking Action
This feature allows the camera to begin a specified operation after a
programmed time of inactivity. This function makes the camera
automatically run a pre-defined action if there is no command from
controller for a pre-defined time period. Wait Time means how long a
camera should wait for from the previous-last (most recent) command
before running the pre-defined action. It can be set to 1 second ~ 3 hours.
OPERATION
3