PT
HD SDI Megapixel PTZ Dome Camera Instruction Manual
53/72
ALARM TRIGGER Setup
ALARM TRIGGER
ALARM NO 1
ALARM TYPE
NORMAL OPEN
TRIGGERED ACTION
UNDEFINED
TRIGGERED ACTION NO -
TRIGGERED HOLD TIME ENDLESS
POST ACTION HOME
POST ACTION NO -
Alarm No
[1~3]
Selects a sensor number to set up.
Type
[NORMAL OPEN/ NORMAL CLOSE]
Selects sensor operation type.
Triggered Action
/ Action No
[UNDEFINED/PRESET/PATTERN/SWING/GROUP]
Selects an action to run when a sensor signal is input.
Hold Time
[ENDLESS / 1~59 SEC. / 1~180 MIN.]
Sets the time period for the action which is run by external sensor activation.
After the time period passes, the action pre-defined in Post Action runs
sequentially in succession to the action by external sensor activation. If this
option is set to ENDLESS , Post Action does not activate.
Post Action /
Post Action No
[HOME/PRESET/PATTERN/SWING/GROUP/PREV ACTION]
Selects the action that a camera will run after the time period in HOLD TIME
passes. If Post Action is set to PREV. ACTION , the camera runs the previous
action which it ran most recently.
OSD MENU
4