15
4
Complete the treatment.
5
Turn the power switch to the off ( ) position.
The compressor turns off and nebulization stops.
6
Disconnect the air tube from the nebulizer kit. Hold the air tube plug and
gently pull down to disconnect the air tube plug from the air tube
connector on the bottom of the nebulizer kit.
For type, dose, and regime of medication, follow the instructions of
your physician or licensed healthcare practitioner.
WARNING
7
Check the air tube. No condensation or moisture should remain in the air
tube.
Do not store the air tube with moisture or medication remaining in the
air tube. This could result in infection as a result of bacteria.
WARNING
If any condensation or moisture remains in the air tube, remove the moisture
from the air tube. Follow the directions below:
1. Make sure the air tube is still connected to the air tube connector on the
upper side of the compressor.
2. Press the power switch on. The compressor will start and pump air through
the air tube to expel the moisture.
3. Press the power switch again to turn the compressor off.
8
Disconnect the air tube from the compressor. Hold the air tube plug and
gently pull the air tube plug off the air tube connector on the upper side of
the compressor.
9
Unplug the power cord from the electrical outlet.
·
Unplug the power cord from the electrical outlet after using the
device.
·
Remove the power cord from the device after use.
·
Do not pull the power cord of power cord strongly.
CAUTION
